Laresar Clean Mars01 Robot Vacuum and Mop Review UK 2026

Key specifications

Suction Power and Cleaning Performance

7000 Pa suction is a key factor behind how this robot vacuum handles everyday mess, including dust, dirt, and pet hair. Suction is described as strong enough to pick up particles across marble, hard floors, wooden floor, and carpets. When the robot detects carpet, it is set to increase suction to maximum for deeper cleaning. The 3-in-1 design also lets it vacuum and mop, but on thick stains it may still need repeat passes. Cleaning results tend to improve when the surface is uncluttered and accessible.

Navigation and Mapping

Navigation and mapping on the ilife mars01 relies on LiDAR laser navigation. This is designed to map the space and support obstacle avoidance as it cleans. The robot uses this mapping to plan routes across rooms rather than cleaning in random back-and-forth patterns. It stores up to five editable maps, so switching floors does not require remapping. During cleaning, obstacle avoidance is supported by anti-fall and anti-collision sensors to help it detect furniture and walls. Performance can vary when rooms change often or the space is cluttered, as mapping depends on a clear layout.

Battery Life and Run Time

The runtime of the ilife Mars01 depends mainly on its 3000mAh battery and the suction level used during cleaning, as the cleaning strategy mapped by its LiDAR affects cleaning coverage but not the level of air being pulled in each session. The manufacturer rates up to 180 minutes on a single charge in low suction mode, covering up to 2152 sqft (around 2,000+ sq ft). Runtime is reduced when suction increases, including when carpet is detected and suction rises. For real homes, longer sessions suit hard floors best, while mixed floors can require recharging sooner.

Mop Function

The ilife Mars01 includes a built-in mop function as part of its 3-in-1 vacuum, sweep, and mop design, enabling it to handle more than one cleaning task during a single run. During the ilife Mars01 vacuum and mop operation, it can sweep and vacuum while mopping, which reduces the need for separate passes on everyday floors. The mop function is designed for multiple surfaces, including marble, hard floors, wooden floor, and carpets, although mopping performance on carpets is less consistent than on hard flooring. Mopping can be selected via app control, and wet mopping depends on floor condition.

Self-Empty and Maintenance

For day-to-day upkeep, the ilife Mars01 is less about emptying a dust bin after every cleaning run and more about basic after-care tasks that support its vacuum, sweep, and mop workflow. The ilife mars01 clean robot vacuum and mop focus on maintenance is the practical point: after sessions, check the dust path and sensors, then wipe the mop area to help prevent residue build-up. The robot supports lidar mapping and obstacle detection, so keeping the sensors clean supports reliable obstacle detection and helps avoid errors. It suits straightforward routine cleaning, while a drawback is that more frequent inspection may be needed in dust-heavy homes.

App Control and Smart Features

Setting up app control is straightforward because the ilife Mars01 supports 2.4GHz WiFi and connects to its mobile app for day-to-day commands. After pairing, owners can run vacuum, sweep, and mop routines, and switch modes from the screen. The robot can be turned on or off using its physical button. Voice control is supported via Alexa and Google Assistant, although it depends on WiFi stability. For multi-floor homes, it stores up to five editable maps, which helps with changing floors without remapping. The ilife Mars01 clean robot vacuum and mop Amazon listing highlights this convenience.

Noise Level

In practical terms, the ilife mars01 clean robot vacuum and mop noise level depends on its operating mode, especially vacuuming and any increase in suction when carpet is detected. It runs with vacuuming, sweeping, and mopping, so sound can change as the cycle progresses. With battery runtime reaching 180 minutes and "maximum" suction possible on carpets, louder moments are likely during that phase. For apartments, checking the noise level in use may still be necessary.

Pet Hair Performance

The Laresar Clean is designed to pick up dust, grime, and pet hair using 7000Pa suction. When it detects carpet, it can increase suction up to maximum for deeper cleaning. In daily use, it handles multiple floor types, including marble, hard floors, wooden floor, and carpets, helping prevent hair from getting trapped when switching surfaces. For pet owners, its vacuum-and-sweep-and-mop setup can collect hair first, then reduce residue across the floor. Results depend on the amount of hair present, and the robot vacuum price can vary by retailer, so value should be checked locally.

Cleaning and Maintenance

Regular cleaning and basic upkeep help the Laresar Clean maintain its vacuum, sweep, and mop functions. After use, the owner should empty the dust pickup, then check for hair on the suction path and brushes because pet hair can build up. The mop routine also needs attention: the tank and pad should be rinsed after sessions and dried before storage to reduce odours. When moving between hard floors and carpet, stuck debris should be removed so the Mars01 can respond to carpet detection. Maps can be reused, but the sensors and wheels should be wiped regularly.

Who Is This Robot Vacuum For?

Who is the robot vacuum best suited for? The Laresar Clean Mars01 is a clean robot vacuum and mop designed for busy households that want vacuuming, sweeping, and mopping as part of a single routine rather than completing each task separately. It supports homes with multiple floors thanks to the ability to store up to 5 editable maps, and it uses LiDAR navigation to help avoid obstacles. It is suited to mixed flooring too, with claims that it can handle marble, hard floors, wooden floor, and carpets, plus automatic suction increase on carpet. With 7000Pa suction and an 180-minute runtime, it is positioned for larger spaces up to 2152 sqft.

Where to Buy in the UK

In the UK, the Laresar Clean is typically found through online retail listings and marketplaces, as it is the robot vacuum budget model. Shoppers usually check major e-commerce sites for current listings and confirm the exact "Mars01" model name, as bundles can vary. To find the best price for the Laresar Clean in the UK, listings should be compared by price and delivery cost, while also confirming the product includes the vacuum, sweep, and mop functions. Some listings may reference LiDAR mapping, 7000Pa suction, and up to 180 minutes runtime, so these details can be verified before purchase.